Eight Tips to Select Wooden Tiles

Time:2024.08.19 Views:

Eight Tips to Select Wooden Tiles


1. Layout: A Greater Variety of Patterns

The layout design is crucial in determining whether porcelain tiles can realistically mimic the natural wood grain. The more patterns there are, the lower the repetition rate of the wooden tiles, resulting in a more natural and lifelike paving effect. The clearer and more delicate the pattern, the more it can showcase the fine texture of wood.

 

1.png

 

Common wood grain tile designs in the market tend to be relatively simple, often leading to an overly repetitive overall effect after installation. Therefore, when selecting wooden tiles, one should choose products with rich design variations and diverse textures. If the budget allows, it is recommended to choose more than 10 patterns; if the budget is average, then opt for 6 patterns. Specifically, you can pay attention to brands or product series that offer a variety of pattern designs.

 

Additionally, when purchasing wooden tiles, place the tiles in a well-lit area to carefully observe whether the texture is clear, and whether there is any blurring or repetition.

 


2.Color: Close to the Natural Wood Color is Better

Color is one of the important attributes of wooden tiles. Natural wood-colored tiles not only better simulate the texture of natural wood but also coordinate with other wooden elements in the home environment, creating a more natural and harmonious atmosphere.

 

For a better effect, choose wooden tiles that are as close to the natural wood color as possible: If the home has good lighting, both light and dark colors can be chosen; if the lighting is poor, opt for light colors. In short, the choice should be based on climate, lighting, and personal preference, with the basic principle being lighter rather than darker.

 Also, consider the glossiness of the wood grain tile color. Generally, tiles with an appropriate glossiness can better simulate the texture of natural wood.

2.png

 

3. Texture: with a Realistic Visual Effect and a Smooth Touch

To pursue the texture of real wood flooring, one should choose wooden tiles with a moderate   embossed texture for a more realistic visual effect, closer to real wood flooring, and more comfortable underfoot. Avoid tiles with very flat textures, as they have a poor visual effect and feel, lacking the texture of wood flooring and appearing cheap.

 

3.png

 

 When purchasing wooden tiles, assess the surface texture and craftsmanship through observation and touch. Tiles with a realistic visual effect and a smooth touch often have better quality and texture. Also, pay attention to the surface treatment process, such as glazing and anti-slip treatment, to ensure comfort and safety during use.



4. Size: According to the Area of the Housing Type

The size of the wooden tiles is very important as it directly affects the overall spatial effect after paving.

 

wooden tiles are usually slim and long, including specifications like 150×800mm, 150×900mm, 165×1000mm, 200×1000mm, 200×1200mm, 200×1800mm, etc. In recent years, larger wooden tiles with the same length-to-width ratio as floor tiles (1:2) have appeared, such as 600×1200mm, 750×1500mm, 900×1800mm, etc.

 

4.png


Most people who choose wooden tiles do so to pursue the effect of wood flooring. Compared to 600×1200mm, 750×1500mm, 900×1800mm wooden tiles, the slim and long tiles more closely resemble wood flooring. Therefore, it is recommended to choose slim and long tiles. Due to proportion issues, the 200×1000mm size appears relatively short and stout, and is not recommended. Given this situation, 150×900mm and 200×1200mm sizes are more recommended.

 

For American, French, or Southeast Asian styles, it is recommended to use the "herringbone" paving method, which creates a stylish space. For areas less than 70 square meters, choose the 150×900mm size; for areas larger than 70 square meters, choose the 200×900mm size.

 

For natural wood minimalist, modern, or cream-colored natural wood styles, regardless of the area, consider the 200×1200mm size directly and use the "369" or "step-up" paving method. This will give the entire house the look of real wood flooring, extending the sense of space and adding a three-dimensional feel.

 

As for the large-sized tiles like 600×1200mm, 750×1500mm, 900×1800mm, they can easily appear stale and do not resemble wood flooring, so they are not recommended. However, this does not mean they are completely useless; they can still save costs in commercial spaces like hotels and appear more atmospheric.


5.Water Absorption Rate: Full-Glazed Instead of Half-Glazed The water

Absorption rate is one of the important indicators for measuring the quality of tiles. Tiles with a water absorption rate below 0.5 are called full-glazed tiles, which are stable in performance, hard, wear-resistant, corrosion-resistant, and have strong stain resistance. Tiles with a water absorption rate between 0.5% and 10% are called half-glazed tiles, which lack the wear resistance, and are more prone to breakage.

 

5.png

 

 

Due to the need to simulate the texture of natural wood, the water absorption rate of wooden tiles is relatively high. For households with underfloor heating or areas with significant temperature differences, it is advisable to choose full-glazed tiles. If the budget allows, it is recommended to choose full-glazed tiles; if the budget is limited, then consider half-glazed tiles.

When purchasing wooden tiles, you can inquire with the merchant or check the product manual to understand the specific water absorption rate.

 

6.Edge: Rectangular Edges for a Higher Grade Look 

The choice of edge for wooden tiles should not be ignored, as there are two types: rectangular and round (original).

 

6.png


 

wooden tiles with rectangular edges have a high level of flatness, making them easy to lay and resulting in clearer, tidier lines after installation. This creates a more luxurious and refined visual effect. In contrast, round edge products appear more ordinary and lack a sense of hierarchy. After installation, the joints are larger, the grout is not aesthetically pleasing, and the gaps are prone to expansion, making them difficult to clean and more prone to warping if laid improperly.

 

It is advisable to choose wooden tiles with rectangular edges whenever possible. During the laying process, it is important to maintain even gaps between the tiles to enhance the overall aesthetic appeal.


7.Laying: According to the Situation and Pay Attention to Detail Planning 

The laying method and detail processing are the key factors that can easily lead to the failure of wooden tiles.


 

7.png

 

 

Firstly, it is best not to use the “H-shaped” laying method. This is because most wooden tiles have a slight arch in the middle and lower edges on both ends. The drawback of this method is that it uses the lowest part of the tile surface to meet the highest part, which easily leads to the tiles warping. Secondly, considering that the transition details of wooden tiles are very important, it is best to start laying the tiles from the doorway. This way, the entrance area will not have half-cut tiles, and the less noticeable areas against the wall are usually covered by beds or cabinets. Thirdly, if no threshold stone is used for the transition area between the inside and outside of the door, metal trim strips can be chosen. These trim strips are both beautiful and can reduce the gaps between the bedroom and living room, improving sound insulation. Fourthly, when laying wooden tiles, there must be a gap between each tile, preferably 1.5-2mm.

When purchasing wooden tiles, communicate with the merchant or a professional tile layer to determine the appropriate laying method and detail processing for your home. Additionally, proper planning and design should be done before laying to ensure the final laying effect meets expectations.


 

8.Grouting: Enhancing Overall Aesthetics and Durability 

Grouting is a critical step in the installation of wooden tiles and is one of the factors that can lead to failure if not done properly. It not only improves the aesthetic appeal of the joints between the tiles but also enhances the overall durability and waterproofing of the installation.

It is recommended to choose a grout color that is one shade darker than the wooden tiles. This will create a shadow line between the two tiles, achieving a wood floor-like visual effect.

8.png

 

When selecting grouting materials, it is important to choose products that coordinate with the color of the wooden tiles. Additionally, consider the abrasion resistance and waterproofing properties of the grout, which can be obtained by consulting the merchant or by checking the product specifications in the manual. Professional assistance should be sought for the grouting process to ensure the quality and effect of the work.

Have you got the eight key points regarding the selection and installation of wooden tiles?

Lets see some brand that will exhibit in the 41st CeramBath, which may satisfy your needs to select wooden tiles.

Brand Spotlight - Fatong Ceramics

Exhibition Hall: A328A China Ceramics City

9.png


 

The leading producer and seller of porcelain floor and wall tiles as well as ceramics worldwide is Fatong Ceramics. Fatong Ceramics, is famous for producing ceramics of high-quality workmanship. Every single tile is custom-made with the help of modern technologies to guarantee the material’s sturdiness and lasting characteristics.

Diverse Product Range

The brand offers a variety of ceramics and porcelain tiles, including marbled and rustic wooden tile sets, catering to different aesthetic and practical needs.

Customer Satisfaction

To cater to the needs of their customers, Fatong Ceramics ensures that each product is of good quality and designed to be visually appealing. Its tiles are made to give any living space that elegant and aesthetic appeal.

Fatong Ceramics has emerged as one of the most popular brands for ceramic and porcelain tile for it employs high standards in its work, new and diverse designs, flexibility in their use, and high environmental consciousness. No matter if you are searching for beauty treasures home decoration or functional necessities for a business place, Fatong Ceramics provides all of them perfectly in each tile.




Brand Spotlight - Romantic Ceramics

Exhibition Hall: B122, B135, B140 China Ceramics City



10.png


One of the industry pioneers in ceramic and porcelain tile, Romantic Ceramics has made a name for itself with the high calibre, originality, and designs it incorporates into its product lines. 

Romantic Ceramics identifies itself with quality workmanship. All the tiles go through a rigorous process whereby they are made to endure tough conditions and have strength and a polished look.


 Innovative Designs

From designing the patterns of the glazed wood to creating complex sheets inspired by marble, the brand presents designs that are both creative and contemporary.

Versatility in Applications

Despite the similarity to wall tiles, the tiles from Romantic Ceramics come in various designs to fit different uses. Whatever their usage, these tiles are a perfect blend of beauty and functionality whether you are redesigning your bathroom, kitchen or additional living space.

Customer-Centric Approach

The brand focuses on delivering tiles that meet the needs of homeowners and designers, ensuring that their products leave a lasting impression.


Finally, selecting the correct tile for your home may make it stand out and represent your individual style. With the diverse designs and devotion to client satisfaction, these businesses mentioned above ensure that your house not only looks great but also operates well for years to come. 

In addition, China Ceramics City has the ceramic tile you want - Gathering 200+ Factories of Ceramic Tiles and Bathroom Products. We'd glad to help you find suitable products and factories for free!

(SOURCE: CHINA CERAMICS NET)




Share this to :

Copyright Foshan China Ceramics City Group Co., Ltd. Site by:YCL